Axel AX4000 User's Manual - Manual (Page 20)

Setting-Up the Office Server in Interactive Mode
14
AXEL Office Server
2.2 - SET-UP OVERVIEW
The Office Server set-up interface provides menus and sub-menus. Its number
may select each menu item. A menu item may either lead to a sub-menu or run
a command.
2.2.1 - Navigation
To select a menu item, enter the item number and press <CR> (Carriage
Return Key).
To go back to the previous menu, enter <q> then <CR>.
To go back to the main menu, enter <Q> then <CR>.
2.2.2 - Entering Values
To change a set-up parameter value, enter the new value then press <CR>
(pressing <CR> without entering a value keeps the current value).
To enter ASCII codes lower than 20 hexadecimal, enter '\' then the hexadecimal
ASCII code. For example, '\1Bz' encodes 'Esc z'.
Useful tips:
- permitted parameter values are displayed between '<' and '>'. These may
be either a (comma-separated) list of correct values or the max. and min.
values.
- the current value of the parameter is displayed between brackets ([xxx]).
Examples:
Data transfer Rate <300 -> 115200> [38400]:
Service <telnet, tty, lpdrcmd> [telnet]: