Axel AX4000 User's Manual - Manual (Page 41)

Tools and Statistics
AXEL Office Server
35
- ax_reboot : command for AX4000 reboot,
- password : specify the set-up password if set.
3.3 - RESETTING A SERIAL LINE
The serial line reset feature allows a line to be reset without rebooting the Office
Server. This feature can be used:
- to stop and restart the associated network service
- to apply new serial line settings (data transfer rate, handshake, etc.).
Use the following rsh command to reset the Office Server serial line:
$ rsh axname ax_sinit password line <CR>
Where:
- axname : AX4000 name (/etc/hosts) or IP address,
- ax_reboot : command to reset the serial line,
- password : specify the set-up password if set,
- line
: name of serial line (ex: ch1 or ch4).
The following message is displayed: 'OK, chx init'.
3.4 - CONNECTION MANAGEMENT
The [Tools] →[connections] menu item lists all current connections so that
active connections may be manually closed if required.