Axel AX4000 User's Manual - Manual (Page 52)

Using a Script to Set-Up the Office Server
46
AXEL Office Server
ERR 105: invalid rcmd command.
Command: any command
Cause: the remote command is unknown.
Consequence: no effect.
Solution:
valid commands are listed in Appendix A.10
ERR 106: cmos busy.
Command: setup_send
Cause: another rsh command (setup_get or setup_send) is
running, or another user has entered set-up, on the target
Office Server.
Consequence: no effect.
Solution:
Either wait for a few seconds then repeat the command, or
arrange to exit set-up on the target Office Server.
ERR 113: password required
Command: setup_send, ax_reboot and ax_download
Cause: the AX4000 Interactive Set-Up is password-protected. This
password hasn't be specified within the command.
Consequence: no effect.
Solution:
use the right password.
ERR 114: invalid password
Command: setup_send, ax_reboot and ax_download
Cause: the AX4000 Interactive Set-Up is password-protected. This
right password hasn't be specified within the command.
Consequence: no effect.
Solution:
use the right password.
4.4.2 - Set-Up Warning Error Messages
Set-up warning error messages do not stop the rsh command but indicate a
problem (such as a syntax error, for example). The following warnings may
occur: