Axel AX4000 User's Manual - Manual (Page 54)

Using a Script to Set-Up the Office Server
48
AXEL Office Server
ERR 205: xxx: invalid parameter value. Ignored
Command: setup_send
Cause: the value given for this set-up parameter (xxx) is not valid
(For example: ch1_service_type=tel).
Consequence: the set-up parameter is ignored. The current value of this
parameter is retained.
Solution: check the possible values of this parameter (appendix A.7).
4.4.3 - Others Warning Error Messages
The following warning error messages indicate a problem during the check
stage performed at the end of the remote set-up. The following warnings may
occur:
ERR 211: Duplicated lpdrcmd qname. Duplicate qname(s) reset.
Command: setup_send
Cause: many lpdrcmd services use the same identifier.
Consequence: to get a consistent configuration, some services have been
removed.
Solution: check service identifier values.
ERR 212: Duplicated router. Duplicate router(s) reset.
Command: setup_send
Cause: a destination can be reached by two (or more) routers.
Consequence: to get a consistent configuration, only one of these routers is
retained
Solution: check the router table.
ERR 213: Incomplete router(s) info. router(s) reset.
Command: setup_send
Cause: router parameters are missing
Consequence: to get a consistent configuration, some routers have been
removed.
Solution: check the router table.