Axel AX4000 User's Manual - Manual (Page 51)

Using a Script to Set-Up the Office Server
AXEL Office Server
45
4.4.1 - Fatal Errors
Fatal errors stop the rsh command. The following fatal errors may occur:
ERR 101: header label expected. Setup not updated
Command: setup_send
Cause: BEGIN_AX4010_SETUP or BEGIN_AX4020_SETUP is not
the first line of the configuration file.
Consequence: the Office Server set-up is not modified.
Solution:
check the file. Replace it with a correct AXEL configuration
file.
ERR 102: bad header label protocol version. Setup not updated
Command: setup_send
Cause: the protocol version (included in the header label) cannot be
processed by the current Office Server firmware.
Consequence: the Office Server set-up is not modified.
Solution:
use a configuration file with a compatible protocol.
ERR 103: Can't update setup, trailer label not found.
Command: setup_send
Cause: END_AX4010_SETUP or END_AX4020_SETUP is not found.
Either this label was not included in the configuration file or
the rsh connection failed.
Consequence: the Office Server set-up is not modified.
Solution:
add this label to the end of file and run the rsh command
again.
ERR 104: Can't get complete set-up (rcmd prematurely ended).
Command: setup_get
Cause: a network problem has occurred or the rsh/rcmd command
has been killed or aborted.
Consequence: the set-up obtained by the command is invalid (the trailer
label is missing).
Solution: run the rsh command again.