Daktronics Venus DataStreamer - Manual (Page 29)

Configuration 23
4. Click Add; the Data Links Properties window will
open as shown in Figure 36.
5. Click Microsoft OLE DB Provider for ODBC
Drivers.
6. Click Next at the bottom of the screen.
7. Select the option Use Connection String as shown
in Figure 37. Click Build and the Select Data Source
window will appear.
8. Click the Machine Data Source tab. Click New.
The Create New Data Source window will appear as
shown in Figure 38. Do not change any
information on this screen. Simply click Next to
proceed to the next step.
Figure 36: Setting DataLink
Properties
Figure 37: Connection Sharing
Properties
Figure 38: Create New Data Source Dialog