Westermo MDI-112-F4G - Manual (Page 105)

101
Map CoS 1 to Queue 0 Switch(config)# qos cos-map 1 0
The CoS to queue mapping is set ok.
Map CoS 2 to Queue 0 Switch(config)# qos cos-map 2 0
The CoS to queue mapping is set ok.
Map CoS 3 to Queue 1 Switch(config)# qos cos-map 3 1
The CoS to queue mapping is set ok.
Map CoS 4 to Queue 2 Switch(config)# qos cos-map 4 2
The CoS to queue mapping is set ok.
Map CoS 5 to Queue 2 Switch(config)# qos cos-map 5 2
The CoS to queue mapping is set ok.
Map CoS 6 to Queue 3 Switch(config)# qos cos-map 6 3
The CoS to queue mapping is set ok.
Map CoS 7 to Queue 3 Switch(config)# qos cos-map 7 3
The CoS to queue mapping is set ok.
Display – CoS-Queue
mapping
Switch# sh qos cos-map
CoS to Queue Mapping :
CoS Queue
---- + ------
0 1
1 0
2 0
3 1
4 2
5 2
6 3
7 3
DSCP-Queue Mapping
Format Switch(config)# qos dscp-map
PRIORITY Assign an priority (63 highest)
Switch(config)# qos dscp-map 0
QUEUE Assign an queue (0-3)
Format: qos dscp-map priority_value queue_value
Map DSCP 0 to Queue 1 Switch(config)# qos dscp-map 0 1
The TOS/DSCP to queue mapping is set ok.