Westermo MDI-112-F4G - Manual (Page 90)

86
Switch(config-if)#
Switch(config-if)# description this is the VLAN 2
Switch(config-if)# no description ->Delete the
description.
IP address of the
VLAN
Switch(config)# interface vlan 2
Switch(config-if)#
Switch(config-if)# ip address 192.168.1.200/24
Switch(config-if)# no ip address 192.168.1.200/24
->Delete the IP address
Create multiple
VLANs (VLAN 5-10)
Switch(config)# interface vlan 5-10
Shut down VLAN Switch(config)# interface vlan 2
Switch(config-if)# shutdown
Switch(config-if)# no shutdown ->Turn on the VLAN
Display – VLAN table Switch# sh vlan
VLAN Name Status Trunk Ports Access Ports
---- ------------ -------
--------------------------
1 VLAN1 Static - fa1-7,gi8-10
2 VLAN2 Unused - -
3 test Static fa4-7,gi8-10
fa1-3,fa7,gi8-10
Display – VLAN
interface
information
Switch# show interface vlan1
interface vlan1 is up, line protocol detection is
disabled
index 14 metric 1 mtu 1500
<UP,BROADCAST,RUNNING,MULTICAST>
HWaddr: 00:07:7c:ff:01:b0
inet 192.168.2.200/24 broadcast 192.168.2.255
input packets 639, bytes 38248, dropped 0,
multicast packets 0
input errors 0, length 0, overrun 0, CRC 0, frame
0, fifo 0, missed 0
output packets 959, bytes 829280, dropped 0