Security – Westermo MDI-112-F4G User Manual
Page 117
113
4.10 Security
The switch provides several security features for you to secure your connection.
The features include Port Security and IP Security.
Following commands are included in section:
4.10.1 Filter Set (Access Control List)
4.10.2 IEEE 802.1x
4.10.3 CLI Commands of the Security
4.10.1 Filter Set (Access Control List)
The Filter Set is known as Access Control List feature. There are two major types,
one is MAC Filter and the other one is IP Filter.
ACE is short of Access Control Entry, user defines the Permit or Deny rule for
specific IP/MAC address or IP groups by network mask in each ACE. One ACL may
include several ACEs, the system checks the ACEs one after one and forward
based on the rule. Once the rules conflict, the old entry is selected as the forward
rule.
Type the Name when select MAC Filter, type ID/Name when select IP Filter. The
ID for IP access list is listed as below of the field. Click Add to add the rule. Click
Edit to edit the content for the rule. After configured, click Apply to apply all the
rules. Reload to reload setting. Remove to remove one of the entries.
MAC Filter (Port Security):