Westermo MDI-112-F4G - Manual (Page 124)

120
System AuthControl: To enable or disable the 802.1x authentication.
Authentication Method: Radius is an authentication server that provides
authentication, with this method; user must connect the switch to the Radius
server. If user selects Local for the authentication method, the switch will use the
local user data base which can create in this page for authentication.
Radius Server IP: The IP address of Radius server
Shared Key: The password between the switch and the Radius Server.
Server Port: UDP port of the Radius server.
Accounting Port: Port for packets that contain the information of account login or
logout.
Secondary Radius Server IP: Backup Radius Server could be set in case of the
primary radius server down.
802.1X Local User: The User can add Account/Password for local authentication.
802.1X Local user List: This is a list shows the account information, User also can
remove selected account.
802.1x Port Configuration
After the configuration of Radius Server or Local user list, user also need
configure the authentication mode, authentication behavior, applied VLAN for
each port and permitted communication. The following information will explain
the port configuration.