Westermo MDI-112-F4G - Manual (Page 26)

22
Global Configuration Mode: Type configure terminal in privileged EXEC mode
you will then enter global configuration mode. In global configuration mode, you
can configure all the features that the system provides you.
Type interface IFNAME/VLAN to enter interface configuration mode, exit to
leave. ? to see the command list.
Available command lists of global configuration mode.
(Port) Interface Configuration: Type interface IFNAME in global configuration
mode and you will then enter interface configuration mode, where you can
configure port settings.
The port interface name for Fast Ethernet port 1 is fa1,… Fast Ethernet 7 is fa7,
Gigabit Ethernet port 8 is gi8. Gigabit Ethernet port 10 is gi10. Type interface
name accordingly when you want to enter certain interface configuration mode.
Type exit to leave.
Type ? to see the command list
Switch# configure terminal
Switch(config)#
access-list Add an access list entry
administrator Administrator account setting
arp
Set a static ARP entry
clock Configure time-of-day clock
default Set a command to its defaults
end End current mode and change to enable mode
exit Exit current mode and down to previous mode
gvrp GARP VLAN Registration Protocol
hostname Set system's network name
interface Select an interface to configure
ip
IP information
lacp Link Aggregation Control Protocol
list Print command list
log Logging control
mac Global MAC configuration subcommands
mac-address-table mac address table
mirror
Port mirroring
no Negate a command or set its defaults
ntp Configure NTP
password Assign the terminal connection password
qos Quality of Service (QoS)
relay relay output type information
smtp-server SMTP server configuration
snmp-server SNMP server
spanning-tree spanning tree algorithm
super-ring
super-ring protocol
trunk Trunk group configuration
vlan Virtual LAN
warning-event Warning event selection
write-config Specify config files to write to