Westermo MDI-112-F4G User Manual

Page 130

Advertising
background image

126

UDP Rule: Permit/Deny udp Source_IP wildcard

Dest_IP wildcard eq Given_Port_Number

Egress_Interface

ICMP Rule: Permit/Deny icmp Source_IP wildcard

Dest_IP wildcard ICMP_Message_Type

ICMP_Message_Code Egress_Interface

Add MAC

Switch(config)# mac-address-table static

0007.7c01.0101 vlan 1 interface fa1

mac-address-table unicast static set ok!

Port Security

Switch(config)# interface fa1

Switch(config-if)# switchport port-security

Disables new MAC addresses learning and aging

activities!

Note 1: Rule: Add the static MAC, VLAN and Port

binding first, then enable the port security to

stop new MAC learning.

Note 2: Not all the model support this feature,

check the product detail specification.

Disable Port Security

Switch(config-if)# no switchport port-security

Enable new MAC addresses learning and aging

activities!

Display

Switch# show mac-address-table static

Destination Address Address Type Vlan

Destination Port

------------------- --------------- -------

------------------------

0007.7c01.0101 Static 1 fa1

802.1x

Enable

Disable

Switch(config)# dot1x system-auth-control

The Port-Based Network Acess Control is globally

enabled

Switch(config)# no dot1x system-auth-control

The Port-Based Network Acess Control is globally

disabled

Advertising
This manual is related to the following products: