Westermo MDI-112-F4G - Manual (Page 8)

4
2 Hardware Installation
This chapter includes hardware introduction, installation and configuration
information.
Following topics are covered in this chapter:
2.1 Hardware Introduction
Dimension
Panel Layout
Bottom View
2.2 Wiring Power Inputs
2.3 Wiring Digital Input
2.4 Wiring Relay Output
2.5 Wiring Ethernet Ports
2.6 Wiring Combo Ports
2.7 Wiring RS-232 console cable
2.8 DIN-Rail Mounting Installation
2.9 Wall-Mounting Installation
2.10 Safety Warning
2.1 Hardware Introduction
LED
Diagnostic LED:
System: Power 1, Power 2, Ring Master (Green), Relay 1, Relay 2, Ring Failure
(Red)
10/100 RJ-45: Link (Green/Left), Activity (Yellow Blinking/Right)
1000Base-T RJ-45: 10/100/1000 Link (Green/Left), Full Duplex (Yellow/Right),
Activity (Green Blinking)
Gigabit SFP: Link/Activity (Green/Green Blinking)
Dimension
The switch dimension (W x H x D) is 137mm (H) x 96mm (W) x 129mm (D)