Westermo MDI-112-F4G - Manual (Page 50)

46
Note 1: To backup the latest startup configuration file,
you should save current settings to flash first. You can
refer to 4.12 to see how to save settings to the flash.
Note 2: 192.168.2.33 is the TFTP server’s IP and
default.conf is name of the configuration file. Your
environment may use different IP addresses or different
file name. Please type target TFTP server IP or file name
in this command.
Restore
Configuration
Switch# copy tftp: 192.168.2.33/default.conf
startup-config
Show Startup
Configuration
Switch# show startup-config
Show Running
Configuration
Switch# show running-config
Firmware Upgrade
Firmware Upgrade Switch# archive download-sw /overwrite tftp 192.168.2.33
mdi-118.bin
Firmware upgrading, mdi-118.bin
Firmware upgrading
.......................................................
.........................
.......................................................
.........................
...........................
Firmware upgrade success!!
Rebooting.......
Factory Default
Factory Default Switch# reload default-config file
Reload OK!
Switch# reboot
System Reboot
Reboot Switch# reboot