Westermo MDI-112-F4G - Manual (Page 118)

114
The MAC Filter allows user to define the Access Control List for specific MAC
address or a group of MAC addresses.
Filter ID/Name: The name for this MAC Filter entry.
Action: Permit to permit traffic from specified sources and Deny to deny traffic
from those sources.
Source/Destination Address: Type the MAC address you want configure, the
format is “AABB.CCDD.EEFF”. Example: “Source to Destination” is
“0007.7c00.0000 to 0007.7c00.0001”.
Source/Destination Wildcard: This command allows user to define single host or
a group of hosts based on the wildcard. Some of the allowance examples are as
below:
Wildcard Bit Number of
allowance
Note
Any 1111.1111.1111 All
Host 1 Only the Source
or Destination.
0000.0000.0003 0000.0000.000(00000011) 3
0000.0000.0007 0000.0000.000(00000111) 7
0000.0000.000F 0000.0000.000(11111111) 15
….