Westermo MDI-112-F4G - Manual (Page 31)

27
System Contact: You can specify contact people here. You can type the name,
mail address or other information of the administrator. The available characters
you can input are 64.
System OID: The SNMP object ID of the switch. You can follow the path to find its
private MIB in MIB browser.
Note: When you attempt to view private MIB, you should compile private MIB
files into your MIB browser first.
System Description: The name of this switch.
Firmware Version: Display the firmware version installed in this device.
MAC Address: Display unique hardware address (MAC address) assigned by the
manufacturer.
Once you finish the configuration, click on Apply to apply your settings.
Note: Always remember to select Save to save your settings. Otherwise, the
settings you made will be lost when the switch is powered off.
4.2.2 Admin Password
You can change the user name and the password here to enhance security
Figure 4.2.2.1 Web UI of the Admin Password
User name: You can type in a new user name here. The default setting is admin.
Password: You can type in a new password here. The default setting is
westermo.
Confirm Password: You need to type the new password again to confirm it.
Once you finish configuring the settings, click on Apply to apply your
configuration.