H3C Technologies H3C S12500-X Series Switches - Manual (Page 136)

125
Figure 35 Network diagram
Configuration procedure
1. Configure Device B:
# Configure VLAN 5 and VLAN 10 as primary VLANs.
<DeviceB> system-view
[DeviceB] vlan 5
[DeviceB-vlan5] private-vlan primary
[DeviceB-vlan5] quit
[DeviceB] vlan 10
[DeviceB-vlan10] private-vlan primary
[DeviceB-vlan10] quit
# Create VLANs 2, 3, 6, and 8, which are to be configured as secondary VLANs.
[DeviceB] vlan 2 to 3
[DeviceB] vlan 6
[DeviceB-vlan6] quit
[DeviceB] vlan 8
[DeviceB-vlan8] quit
# Configure the uplink port Ten-GigabitEthernet 1/0/1 to operate in trunk promiscuous mode in
VLANs 5 and 10.
[DeviceB] interface ten-gigabitethernet 1/0/1
[DeviceB-Ten-GigabitEthernet1/0/1] port private-vlan 5 10 trunk promiscuous
[DeviceB-Ten-GigabitEthernet1/0/1] quit
# Assign the downlink port Ten-GigabitEthernet 1/0/2 to VLAN 2, and configure the port to
operate in host mode. Assign the downlink port Ten-GigabitEthernet 1/0/3 to VLAN 3, and
configure the port to operate in host mode.
[DeviceB] interface ten-gigabitethernet 1/0/2
[DeviceB-Ten-GigabitEthernet1/0/2] port access vlan 2
[DeviceB-Ten-GigabitEthernet1/0/2] port private-vlan host
[DeviceB-Ten-GigabitEthernet1/0/2] quit
XG
E1
/0/2
XGE1/0/
8