Configuring storm control on an ethernet interface – H3C Technologies H3C S12500-X Series Switches User Manual

Page 25

Advertising
background image

14

Task Command

Display traffic rate statistics of interfaces in
up state over the last sampling interval.

display counters rate { inbound | outbound } interface
[ interface-type [ interface-number ] ]

Display the operational and status
information of the specified interface or all

interfaces.

display interface [ interface-type [ interface-number ] ]

Display summary information about the
specified interface or all interfaces.

display interface [ interface-type [ interface-number ] ] brief
[ description ]

Display information about dropped
packets on the specified interface or all

interfaces.

display packet-drop { interface [ interface-type
[ interface-number ] ] | summary }

Display information about storm control
on the specified interface or all interfaces.

display storm-constrain [ broadcast | multicast | unicast ]
[ interface interface-type interface-number ]

Display the Ethernet statistics.

display ethernet statistics

Clear the interface statistics.

reset counters interface [ interface-type [ interface-number ] ]

Clear the statistics of dropped packets on
the specified interfaces.

reset packet-drop interface [ interface-type [ interface-number ] ]

Clear the Ethernet statistics.

reset ethernet statistics

Advertising
This manual is related to the following products: