H3C Technologies H3C S7500E Series Switches - Manual (Page 116)

105
Switch model
(right)
S7502E S7503E-S S7503E S7506E-S S7506E S7510E S7506E-V
SRPU model
(below)
LSQ1SRPD0
(Salience VI-Plus)
— — z — z z z
LSQ1SRP1CB0
(Salience VI-Turbo)
— — z — z z z
LSQ1SRP12GB0
(Salience VI-GE)
— — z — z z z
LSQ1SRP2XB0
(Salience VI-10GE)
— — z — z z z
LPUs
LPU overview
The S7500E series supports various LPUs. The number and type of interfaces provided by an LPU depend
on the LPU type. For the transceiver modules that each LPU supports, see “ Transceiver modules .”
NOTE:
The model of a card is LSQM-prefixed on the card package and LSQ-prefixed on the card panel. For
example, LSQ1FP48SA0 and LSQM1FP48SA0 identify the same card. When you order a card, you refer
to the card by its LSQM-prefixed model. In this chapter, the card models are LSQ-prefixed, the same as
marked on the card panels.
Table 35 LPU specifications
LPU Description Connector
Number
of
interfaces
Interface
transmission rate
Available
transceiver
modules
LSQ1FP48
SA0
48-port 100-Mbps
optical Ethernet
interface card (SFP, LC)
LC 48 100 Mbps
100-Mbps SFP
module
LSQ2FP48
SA0
48-port 100-Mbps
optical Ethernet
interface card (SFP, LC)
LC 48 100 Mbps
100-Mbps SFP
module
LSQ2FT48
SA0
48-port 100-Mbps
electrical Ethernet
interface card (RJ-45)
RJ-45 48
10/100 Mbps,
half/full-duplex
N/A
LSQ1FV48
SA0
48-port 100-Mbps
electrical Ethernet
interface card
(RJ-45)-PoE
RJ-45 48
10/100 Mbps,
half/full-duplex
N/A