Displaying electronic label data – H3C Technologies H3C S7500E Series Switches User Manual

Page 72

Advertising
background image

61

Field Description

Brd Status/Status

Running status of the card:

Master—The card is an active SRPU.

Slave—The card is a standby SRPU.

Absent—No card is in the slot.

Fault—The card is booting or the card has failed.

Normal—The card is an LPU that is correctly operating.

Subslot Num

The maximum number of sub-cards supported by the card.

Sft Ver/ Software Ver

Software version of the card.

Patch Ver

Patch version of the card. If this field is NONE, no patch is installed on the card.

PCB 1 Ver

Version of PCB 1 on the card.

FPGA Ver

FPGA version of the card.

BootRom Ver

Boot ROM version of the card.

CPLD 1 Ver

Version of CPLD 1 on the card.

Chip

Chip number of the card.

Learning Mode

MAC learning mode of the card:

Independent VLAN learning (IVL)

Shared VLAN learning (SVL)

Displaying electronic label data

Use the display device manuinfo command to display the electronic label data for a card.

<Sysname> display device manuinfo

Slot 0:

DEVICE_NAME : LSQM1SRP2XB0

DEVICE_SERIAL_NUMBER : 210231A73JB098000078

MAC_ADDRESS : 0023-895F-958B

MANUFACTURING_DATE : 2009-8-24

VENDOR_NAME : H3C

Slot 1:

DEVICE_NAME : LSQM1SRP2XB0

DEVICE_SERIAL_NUMBER : 210231A73JB098000070

MAC_ADDRESS : 0023-895F-954F

MANUFACTURING_DATE : 2009-8-24

VENDOR_NAME : H3C

Slot 2:

DEVICE_NAME : LSQM1GV48SA0

DEVICE_SERIAL_NUMBER : 210231A76HB095000082

MAC_ADDRESS : NONE

MANUFACTURING_DATE : 2009-10-15

VENDOR_NAME : H3C

Slot 3:

DEVICE_NAME : LSQM1NAT24SC0

DEVICE_SERIAL_NUMBER : 210231A0EAX103000002

Advertising