And fix them with screws, as shown in, Figure 7 – H3C Technologies H3C S7500E Series Switches User Manual
Page 22
Advertising
11
Figure 7 Attaching the slide rail to the cage nuts with screws
5.
Keep the slide rail horizontally and adjust its length until the installation holes on the rear end of the
slide rail touch the cage nuts on the rear rack post. Then fix them with screws.
TIP:
Install a screw in each mounting hole of the slide rail to ensure its weight bearing capacity.
6.
Repeat step 4 and step 5 to install the other slide rail. Make sure the two slide rails are at the same
height so the device can be placed on them horizontally.
Advertising