Configuration procedure, N in, Figure 43 – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 110
Advertising
99
Figure 43 Network diagram for UDP helper configuration
Configuration procedure
NOTE:
Make sure that a route from Switch A to the subnet 10.2.0.0/16 is available.
# Enable Switch A to receive directed broadcasts.
<SwitchA> system-view
[SwitchA] ip forward-broadcast
# Enable UDP helper.
[SwitchA] udp-helper enable
# Enable the forwarding broadcast packets with the UDP destination port 55.
[SwitchA] udp-helper port 55
# Specify the destination server 10.2.1.1 on VLAN-interface 1.
[SwitchA] interface vlan-interface 1
[SwitchA-Vlan-interface1] ip address 10.110.1.1 16
[SwitchA-Vlan-interface1] udp-helper server 10.2.1.1
IP network
Vlan-int1
10.110.1.1/16
Vlan-int1
10.2.1.1/16
Switch A
Switch B
Server
Advertising
This manual is related to the following products: