Configuration procedure – H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 18

Advertising
background image

7

Configuration procedure

Configure the switch
# Create VLAN 10.

<Switch> system-view

[Switch] vlan 10

[Switch-vlan10] quit

# Add interface GigabitEthernet 1/0/1 to VLAN 10.

[Switch] interface gigabitethernet 1/0/1

[Switch-GigabitEthernet1/0/1] port link-type trunk

[Switch-GigabitEthernet1/0/1] port trunk permit vlan 10

[Switch-GigabitEthernet1/0/1] quit

# Create interface VLAN-interface 10 and configure its IP address.

[Switch] interface vlan-interface 10

[Switch-vlan-interface10] ip address 192.168.1.2 8

[Switch-vlan-interface10] quit

# Configure a static ARP entry that has IP address 192.168.1.1, MAC address 00e0-fc01-0000, and
output interface GigabitEthernet 1/0/1 in VLAN 10.

[Switch] arp static 192.168.1.1 00e0-fc01-0000 10 gigabitethernet 1/0/1

# View information about static ARP entries.

[Switch] display arp static

Type: S-Static D-Dynamic A-Authorized

IP Address MAC Address VLAN ID Interface Aging Type

192.168.1.1 00e0-fc01-0000 10 GE1/0/1 N/A S

Advertising
This manual is related to the following products:

H3C WX5500E Series Access Controllers, H3C WX3500E Series Access Controllers, H3C WX2500E Series Access Controllers, H3C WX6000 Series Access Controllers, H3C WX5000 Series Access Controllers, H3C LSWM1WCM10 Access Controller Module, H3C LSUM3WCMD0 Access Controller Module, H3C LSUM1WCME0 Access Controller Module, H3C LSWM1WCM20 Access Controller Module, H3C LSQM1WCMB0 Access Controller Module, H3C LSRM1WCM2A1 Access Controller Module, H3C LSBM1WCM2A0 Access Controller Module, H3C WA3600 Series Access Points, H3C WA2600 Series WLAN Access Points

Popular Brands
Popular manuals