Configuration procedure – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 89
Advertising
78
Configuration procedure
NOTE:
•
Before performing the following configuration, make sure that the device and the host are accessible to
each another via available routes, and the IP addresses of the interfaces are configured as shown
•
This configuration may vary with different DNS servers. The following configuration is performed on a
Windows server 2000 PC.
1.
Configure the DNS server
# Enter the DNS server configuration page.
Select Start > Programs > Administrative Tools > DNS.
# Create zone com.
As shown in
, right click Forward Lookup Zones, select New zone, and then follow the
instructions to create a new zone named com.
Figure 32 Create a zone
# Create a mapping between host name and IP address.
Advertising
This manual is related to the following products: