Displaying and maintaining ripng, Ripng configuration examples, Configure ripng basic functions – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 184: Network requirements
173
Configuring the maximum number of equal cost routes for load
balancing
Follow these steps to configure the maximum number of equal cost RIPng routes for load balancing:
To do…
Use the command…
Remarks
Enter system view
system-view
––
Enter RIPng view
ripng [ process-id ]
––
Configure the maximum number of
equal cost RIPng routes for load
balancing
maximum load-balancing number
Optional
6 by default
Displaying and maintaining RIPng
To do…
Use the command…
Remarks
Display configuration information
of a RIPng process
display ripng [ process-id ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view
Display routes in the RIPng
database
display ripng process-id database
[ | { begin | exclude | include }
regular-expression ]
Available in any view
Display the routing information of
a specified RIPng process
display ripng process-id route [ |
{ begin | exclude | include }
regular-expression ]
Available in any view
Display RIPng interface information
display ripng process-id interface
[ interface-type interface-number ]
[ | { begin | exclude | include }
regular-expression ]
Available in any view
Reset a RIPng process
reset ripng process-id process
Available in user view
Clear statistics of a RIPng process
reset ripng process-id statistics
Available in user view
RIPng configuration examples
Configure RIPng basic functions
Network requirements
As shown in
, all switches run RIPng. Configure Switch B to filter the route (3::/64) learned from
Switch C, which means the route will not be added to the routing table of Switch B, and Switch B will not
forward it to Switch A.