Webbsi, Program, Security – Emerson Process Management ControlWave EFM 3808 User Manual

Page 203: F.3 webbsi program startup, F.4 security category functions

Advertising
background image

CI-ControlWave EFM

Appendix F / F-

3

Figure F-2B - PC Connected to ControlWave EFM (via Circular Local Port)

Bristol Cable Part Number 395402-01-8 = 10 Foot Comm. Cable
Bristol Cable Part Number 395402-02-6 = 25 Foot Comm. Cable

F.3 WebBSI PROGRAM STARTUP


Ensure that the Local Communications Cable connections (at both the ControlWave EFM
& the PC) are secure.

If the WebBSI Web pages for the ControlWave EFM have been assigned as the default
Web pages for a node in OpenBSI, they can be invoked either from OpenBSI by right
clicking on the appropriate RTU and selecting RTU -> WebPage Access. Web pages are also
accessible by selecting Start -> Programs-> OpenBSI Tools-> WebPage Access -> CW EFC
Pages.

Six Category Functions are provided as follows:

Section F.4 (Security)

Section F.7 (Chromatograph) Section F.10 (Special Functions)

Section F.5 (Station)

Section F.8 (Logs)

Section F.6 (Meter Run) Section F.9 (Load/Save)

F.4 SECURITY CATEGORY FUNCTIONS


Three Web pages are accessible from the Security category section of WebBSI.

• Sign On/Off

(Section F.4.1)

• Contacts (Section F.4.3)

• Locate Nodes (Section F.4.2)

Advertising
This manual is related to the following products: