Emerson Process Management ControlWave EFM 3808 - Manual (Page 204)

F-4 / Appendix F CI-ControlWave EFM
F.4.1 Signing On/Off
When the WebBSI Web pages for the ControlWave EFM are first accessed, the SIGN
On/Off Web page is displayed. A user must select the RTU Name from the drop down
menu. If using OpenBSI Network Edition, this drop down menu will include all nodes
available on the network. If using OpenBSI Local Edition, only the default node (RTU) will
be available.
Figure F-3 - Sign On/Off Web Page
F.4.1.1 Selecting a Node and Signing On
The user must choose the Node they want to sign-on to from the RTU Name list box. The
user must enter the Username and Password. The user must then click on the Sign On
button. If the sign-on attempt is successful, the message Access Granted will appear (in
green text) within the message area. Failure messages appear in red text and informational
messages appear in black text.
F.4.1.2 Signing Off from the Node
To sign off from a Node, the user must click on the [Sign Off] push button. If the sign-off
attempt is successful, the message “Sign Off Successful” will appear in green (failures are
in red).
Note: For Security Maintenance functions refer to CW MICRO Quick Setup Guide – D5124
– Part 2 – Configuring User Accounts & Privileges.
F.4.2 Locating Nodes
The user may identify which node(s) they would like to communicate with by using the
Locator page. The Nodes can be identified either by loading a proxy file, or by loading Open
BSI information. In either case, they will be displayed as icons in a tree on the left side of
the page.