Sony ILCA-99M2 - Manual (Page 132)

Flash/ Underwater Auto: When you select a light source that illuminates the subject, the
product adjusts the color tones to suit to the selected light source (preset white balance). When
you select [Auto], the product automatically detects the light source and adjusts the color tones.
C.Temp./Filter:
Adjusts the color tones depending on the light source. Achieves the effect of CC (Color
Compensation) filters for photography.
Custom 1/Custom 2/Custom 3:
Uses the white balance setting saved in [Custom Setup].
Custom Setup:
Memorizes the basic white color under the light conditions for the shooting environment.
Select a memorized custom white balance number.
Hint
You can display the fine adjustment screen and perform fine adjustments of the color tones as
required by pressing the multi-selector right.
If the color tones do not come out as you expected in the selected settings, perform [WB bracket]
shooting.
or is displayed only when [Priority Set in AWB] is set to [Ambience] or [White].
Note
[White Balance] is fixed to [Auto] in the following shooting modes:
[Intelligent Auto]
If you use a mercury lamp or a sodium lamp as a light source, the accurate white balance will not be
obtained because of the characteristics of the light. It is recommended to shoot images using a flash
or select [Custom Setup].
[110] Shooting White balance
Priority Set in AWB
Selects which tone to prioritize when shooting under lighting conditions such as incandescent
light when [White Balance] is set to [Auto].
Menu item details
Standard:
Shoots with standard auto white balance. The camera automatically adjusts the color tones.
MENU
→
(Camera Settings1)
→ [Priority Set in AWB] → desired setting.
1