Sony ILCA-99M2 - Manual (Page 301)

[Rich-tone Mono.]
In the case of [Rich-tone Mono.], the shutter is released three times for one shot. Be careful about
the following:
Use this function when the subject is motionless or does not flash light.
Do not change the composition during shooting.
When the contrast of the scene is low or when significant camera-shake or subject blur has occurred,
you may not be able to obtain good HDR images. If the product detects such a situation,
appear
on the recorded image to inform you of this situation. Change the composition or re-shoot the image
carefully to avoid image blur, as needed.
This function is not available in the following shooting modes:
[Intelligent Auto]
[Sweep Panorama]
When [ Quality] is set to [RAW] or [RAW & JPEG], this function is not available.
[317] List of MENU items Camera Settings1
Picture Profile
Allows you to change the settings for the color, gradation, etc. For details on “Picture Profile,”
refer to http://helpguide.sony.net/di/pp/v1/en/index.html.
Customizing the picture profile
You can customize the picture quality by adjusting picture profile items such as [Gamma] and
[Detail]. When setting these parameters, connect the camera to a TV or monitor, and adjust
them while observing the picture on the screen.
MENU
→
(Camera Settings1)
→ [Picture Profile] → the profile you want to
change.
1
Move to the item index screen by pressing the multi-selector right. 2
Select the item to change using the up/down sides of the multi-selector. 3
Select the desired value by pressing the multi-selector up/down and press in the
center. 4