Sony ILCA-99M2 - Manual (Page 181)

If you play back the images right after continuous shooting, the monitor may display an icon
indicating that data is being written/the number of images left to write. During writing, some functions
are not available.
[161] Viewing Viewing images
Enlarging an image being played back (Playback
zoom)
Enlarges the image being played back. Use this function to check the focus of the image, etc.
Hint
You can also enlarge an image being played back using MENU.
You can change the initial magnification and initial position of enlarged images by selecting MENU
→
(Playback)
→ [ Enlarge Init. Mag.] or [ Enlarge Initial Pos.].
Note
You cannot enlarge movies.
Display the image you want to enlarge, and then press the button.
Press the button to adjust the zoom scale.
You can also adjust the zoom scale by turning the rear dial. By rotating the front dial,
you can switch to the previous or next image while keeping the same zoom scale.
The view will zoom in on the part of the image where the camera focused during
shooting. If the focus location information cannot be obtained, the camera will zoom in
on the center of the image.
1
Select the portion you want to enlarge by pressing the multi-selector
up/down/right/left. 2
Press the center of the multi-selector to exit the playback zoom. 3