Rugged Cams Workhorse DVR 16 Channel - Manual (Page 115)

114
(2) Using NAS
On the {Storage} menu, go to {NAS Backup} ->{1. NAS Use } using the arrow (ST)
buttons and press the [Select] button.
On the selection box, select ON or OFF using the arrow (ST) or [Select] buttons.
Selecting ON or Test causes a test to run as shown below:
(3) ID
Go to the {2. ID} menu using the arrow (ST) buttons and press the [Select] button.
On the input window, enter the ID using the arrow (STWX) and [Select] buttons.
After inputting the data, go to [Save and Exit] using the arrow (STWX) or [Tab]
buttons and save the setting by pressing the [Select] button.
(4) Password
Go to the {3. Password} menu using the arrow (ST) buttons and press the [Select] button.
On the input window, enter the password using the arrow (STWX) and [Select] buttons.
After inputting the data, go to [Save and Exit] using the arrow (STW X) or [Tab]
buttons and save the setting by pressing the [Select] button.
(5) IP
Go to the {4. IP} menu using the arrow (ST) buttons and press the [Select] button.
On the input window, enter the IP using the arrow (STW X) and [Select] buttons.
(6) Directory
Go to the {5. Directory} menu using the arrow (ST) buttons and press the [Select] button.
On the input window, enter the directory using the arrow (STW X) and [Select] buttons.
After inputting the data, go to [Save and Exit] using the arrow (STW X) or [Tab]
buttons and save the setting by pressing the [Select] button.
(7) Execution time
Go to the {6. Execution Time (Hourly)} menu using the arrow (ST) buttons and press the
[Select] button.
On the input window, enter the execution time using the arrow (STWX) and [Select]
buttons.