Rugged Cams Workhorse DVR 16 Channel - Manual (Page 86)

85
To set all channels at the same time, go to {Motion} and select the [Main Setup] button.
On the selection box, set the sensitivity using the arrow (WX) and [Select] buttons.
Setting the sensitivity
Sensitivity grades include Lowest, Low, Middle, High, and Highest, indicating the
proportion of pixels to the motions being detected. The higher the grade, the
more accurate the detection of motion it is.
B) Sensor
Defines the settings for detecting input from an external sensor compatible with the system
The user can set up to 16 external sensors. Once signal input is detected, the video of the
corresponding channel is recorded.
„ Sensor setting
On the {Recording Setup}Æ{Data 1~4}Æ{Event}Æ{Sensor} menu, go to the desired
channel using the arrow (STWX) buttons and press the [Select] button.
To set all channels at the same time, go to {Sensor} and press the [Select] button.