Rugged Cams Workhorse DVR 16 Channel - Manual (Page 64)

63
Select the channel to be searched.
On the zone setting window, go to the desired zone using the arrow (STW X) buttons. To set
the search zone, press the [Select] button. Shifting the blue focus using the arrow (STW X)
buttons causes the search zone to be displayed in green. After setting the search zone, press
the [Select] button.
The user can set up to four search zones.
Right-click the green zone or press the [Main Setup] button on the remote control to set the
motion degree. There are five motion degrees: Lowest, Low, Middle, High, and Highest. The
default setting is Middle.