Rugged Cams Workhorse DVR 16 Channel - Manual (Page 82)

81
To set all channels at the same time, go to (Mode) and press the [Select] button.
On the selection box, set the recording type using the arrow (WX) and [Select] buttons.
D) Recording frame
Recording frames include the normal type and event type.
Normal Sets the recording frame rate for Automatic and Continuous recording
Event Sets the recording frame rate for Automatic, Motion, Sensor, and Sound recording
Note!
Maximum recording frame by resolution
Model
Resolution
CIF (320X240) Field (640X240) Full (640X480)
Workhorse 120-16 120fps 60fps 30fps
On the {Recording Setup}Æ{Data 1~4}Æ{Recording}Æ{Rate} menu, go to the desired
channel using the arrow (STWX) buttons and press the [Select] button.
On the selection box, set the recording frame using the arrow (WX) and [Select] buttons.
To set all channels at the same time, go to {Rate} and press the [Select] button.