TA Triumph-Adler CX 8036 - Manual (Page 51)

Section 2 Copy Mode 2-11
1.6.1 Arrows - Count Increase / Decrease
Use the arrows to increase or decrease the total numbers of copies desired by one with
each press of the button.
In this example the arrow was press seven times to reach “8 copies”.
1.6.2 Number Pad - Count Increase / Decrease
Press the ”number of copies” value (which is a button) to set the desired number of copies
using a number pad. This will allow the quicker entry of the desired quantity if a larger
number is desired.
a) Press the numbers for the quantity
desired. (up to 999)
b) Select “Enter”
c) If an entry error was made press “C” to
start again
d) If you wish to close the screen without
changing the quantity press “Cancel”.
1.6.3 Set Copy
a) To enable collated sets or copy sets to be printed select the Set Copy button.
b) As originals are scanned , the total number in the set are displayed.