TA Triumph-Adler CX 8036 - Manual (Page 58)

Section 2 Copy Mode 2-18
1.8.3 Enabling Cutsheet
The system is equipped with a cut sheet feeder that can be enabled in the configuration
menu of the user interface.
This can be accomplished by following these steps
1. Select the (?) button in the bottom left corner of the user
interface.
2. Select the Configuration button from the Info/Help screen
3. Using the Left/Right arrows located at the bottom of the
page scroll to page three (3).
4. From the Enable Cut Sheet “Yes” button.
1.8.4 Cut Sheet
To copy onto a cut sheet of media:
a) Select the CUT SHEET button on the main screen.
b) Select the Output Size of the actual cut sheet paper that will be inserted into the Cut
Sheet feeder.
Select desired settings from the main copy screen. Feed your original (s) into the
scanner.