Sony Signature Series NW-WM1ZM2 Walkman Digital Music Player - Manual (Page 66)

66
Exposure
Set the exposure adjustment.
Menu item Detail and setting
value Initial setting value
of the factory
default setting Content
Mode Full auto/Shutter
priority/Iris priority/
Manual Full auto Configure the exposure setting.
[Full auto]: The camera performs gain, iris, and shutter
speed adjustments automatically.
[Shutter priority]: The camera performs gain and iris
adjustments automatically, and you can select the
shutter speed.
[Iris priority]: The camera performs gain and shutter
speed adjustments automatically, and you can select
the iris (aperture).
[Manual]: You can manually adjust gain, iris, and
shutter speed.
Note
Depending on the setting options, the range set by
turning On/Off the high-sensitivity mode may differ.
You cannot set the high-sensitivity mode from the
menu. Referring to the Command List, change the
setting from the VISCA/CGI command.
Exposure
Compensation –7 to +7 0 Adjust the target brightness for the automatic
exposure setting.
Selecting a higher value brightens the image and a
lower value darkens the image. This function can be
selected only when [Mode] is set to [Full auto],
[Shutter priority], or [Iris priority].
Backlight
Compensation On/Off Off Compensates the exposure to make the subject easy
to see when the shooting environment is affected by
a back light.
This function can be selected only when [Mode] is set
to [Full auto], [Shutter priority], or [Iris priority].
Spotlight
Compensation On/Off Off Darkens the exposure when a part of the object such
as a spotlighted face is bright.
The spotlight compensation function is disabled
when the checkbox of [Backlight Compensation] is
selected.
This setting is available when [Mode] is set to [Full
auto], [Shutter priority], or [Iris priority].
AE Speed 1 to 48 1 Select the adjustment speed for exposure
adjustment.
You can select the speed at which the camera reaches
the optimum exposure setting from 1 (standard) to 48
(slow). Select when the brightness of the object
changes instantaneously.
This setting is available when [Mode] is set to [Full
auto], [Shutter priority], or [Iris priority].
Visibility Enhancer On/Off Off In high-contrast scenes such as scenes against a back
light, this function reduces overexposure and
underexposure.
Effect –3 to +3 0 Set the level of the Visibility Enhancer.
Iris F2 / F2.2 / F2.4 /
F2.6 / F2.8 / F3.1 /
F3.4 / F3.7 / F4 /
F4.4 / F4.8 / F5.2 /
F5.6 / F6.2 / F6.8 /
F7.3 / F8 / F8.7 /
F9.6 / F10 / F11 /
Close F2 Select the iris value.
This function can be selected only when [Mode] is set
to [Iris priority] or [Manual].