FARGO electronic L000286 - Manual (Page 136)

RESTRICTED USE ONLY Fargo Electronics, Inc.
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 6.1) 4-37
Selecting the Print Quality (Best, Normal or Fast print modes)
The three (3) modes of print quality are the Best, Normal or Fast print modes (described
below). (Note: The Normal print mode is the default selection.)

Photographic Icon: The photographic icon on the right side change in order to
represent the different print quality images. The icon only changes when the selection
involves the Best, Normal or Fast print modes. The icon does not change when the
selection involves the Normal and Fast print modes.

Default Selection (Best): When Best is selected, an additional check box will activate
allowing Operators to select the use of the pigmented pen. Initially, most Operators will
only need to select this if they need bar code readability by an infrared bar code scanner.
Step Procedure
1 Select either the Fast, Normal or Best radio buttons for the desired print quality
and print speed mode.

Fast Print Mode: The Speed mode is 26 seconds per card / 138 cards per
hour in Fast mode. Fast provides a very fast print, but a slightly lower level of
print quality.

Normal Print (Default) Mode: The Speed mode is under 42 seconds per card
/ 86 cards per hour in the Normal speed mode. Normal provides a medium
level of print quality and speed. Normal is the default setting.

Best Print Mode: The Speed mode is under 76 seconds per card / 47 cards
per hour in the Best print mode. Best provides maximum print quality, but
takes the longest to print. Over the edge printing is supported. The printed card
is dry to the touch and does not transfer ink to hands or clothing within 5
seconds of printing.