FARGO electronic L000286 - Manual (Page 44)

RESTRICTED USE ONLY Fargo Electronics, Inc.
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 6.1) 2-35
Technician Handbook for CardJet Card Printers
This section is provided for Technicians at the Intermediate and Expert levels, who want to
become thoroughly familiar with the Printer functions as soon as it is installed.

From a Technician
’
s perspective, the CardJet Professional 410 and Persona C7 printing
systems consists of an HP Print Engine and Fargo additions that allows printing on
CardJet cards (CR-80, 30 mil). For this purpose, the Printer has a special Card Path, an
Input Hopper for a Card Cartridge, extra Card Sensor(s) and a Fargo Controller (2
Boards). (Note: The Two models are the Professional Series CardJet 410 Card
Printer/Encoder and the Persona CardJet C7 Printer/Encoder.)

The purpose of this section is to provide Technicians with a checklist of service
requirements built into the CardJet Card Printer. The Technician can review these service
requirements and refer to their corresponding service procedure (as needed). The entire
printing system is designed for very efficient service and maintenance by the Technician.
Topic Description
Bad Card
Cartridge Tag
Detection
(See Card
LED) The Printer correctly validates a replacement Cartridge and reports a Bad
Card Cartridge tag via the Card LED

before running out of cards.
The printing will continue when the Card Cartridge is replaced with a good
Cartridge.
Black Ink
Cartridge The Black Ink Cartridge provides enough ink for a minimum of 900 cards.

CardJet 410: 900 card minimum

Persona C7: 750 card minimum
Continued on the next page