FARGO electronic L000286 - Manual (Page 140)

RESTRICTED USE ONLY Fargo Electronics, Inc.
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 6.1) 4-41
Selecting the Rotate Front by 180 Degrees option
Use this option to change the position of the printed image in relation to the set location of a
card's magnetic stripe.
Step Procedure
1 Select the Rotate Front 180 Degrees option to rotate the image on the front of
the card by 180 degrees when printed. This will rotate the image 180 degrees.

Default: The default orientation of the image will effectively be rotated 180
to what it is currently so that in the Portrait the image will eject bottom first; if
Rotate 180
°
is selected, the image will eject top first.

Unselected Option: When the Rotate Image 180
°
option is not set, the
Driver will perform a 180
°
degree rotation of the image; when the Rotate
Image 180
°
option is set the Driver will not perform the 180 degree rotation).
Specifying the Copies
Specifies the number of copies to be printed, as shown above.