FARGO electronic L000286 - Manual (Page 60)

RESTRICTED USE ONLY Fargo Electronics, Inc.
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 6.1) 2-51
Technician Handbook for CardJet Card Printers (continued)
Topic Description
Ink LED (bad
tag) Before running out of ink and having a new Ink Cartridge installed, the
Printer correctly validates the replacement Cartridge and reports that it
has a bad tag via the ink LED and that printing are restarted when the
Ink Cartridge is replaced with a legal Cartridge.
Ink LED error
light (reports
incorrect Ink
Cartridge
install; both
410/C7 models) The Ink LED error light reports incorrect Ink Cartridge installation.
The Ink Cartridges are a protected supplies item to the Fargo Printer.
Ink Level
Monitoring (See
Printer Driver
Fuel Gauge) The Printer Driver Fuel Gauge feature correctly provides the Operator
with a display of the estimated amount of ink remaining in the
Cartridge

when the Operator requests it. The Printer is set up to
ensure the appropriate ink levels exist before starting each print job.
Ink Level
Gauge SmartLoad Ink Cartridges contain an exclusive Ink Level Gauge that
reports remaining prints and alerts when the ink is low or out.
InkJet Bad Card
Cartridge Tag
Detection The Printer correctly validates a replacement Cartridge and reports that
it is illegal via the Card LED

before running out of cards.

The Printer correctly detects and reports card Cartridge with a bad
tag via LED and on-screen message.

The printing will continue when the Card Cartridge is replaced with
a good Cartridge.
Continued on the next page