FARGO electronic L000286 - Manual (Page 53)

RESTRICTED USE ONLY Fargo Electronics, Inc.
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 6.1) 2-44
Technician Handbook for CardJet Card Printers (continued)
Topic Description
Color Ink
Cartridge Here is the breakdown:

CardJet 410: 300 color ink cards

Persona C7: 250 color ink cards
Driver
Installation Installation and Startup Procedures. See Section 3):
1. Load the Driver CDROM into the PC. (Note: The host Driver
download software automatically opens and prompts the Operator
through the Driver installation process.)

The device initialization and Firmware downloading
occurs

when the Printer start-up is initiated.

The cards are printed with acceptable color reproduction and
image placement

when the Operator initiates a print job
following Driver installation.
Driver Operator
interface Firmware traps and reports encoding error responses via required LED
illumination and messages at the Driver Operator interface.

Firmware correctly detects the card feed error condition and
indicates a fatal error condition (via the Card LED) and a PC on-
screen error message indicating a card feeding error (via the Driver
Operator interface).

Firmware correctly detects the card printing jam condition and
indicates a fatal error condition (via the Card LED) and a PC on-
screen error message (via the Driver Operator interface).
Empty Ink
Cartridge (1)
(See Ink LED
and Error
Messages) The Printer correctly notifies the Operator of the empty Ink Cartridge via
the Ink LED and on screen message

before running out of ink.
The remainder of the print job is restarted when a new Cartridge is
correctly installed.
Continued on the next page