FARGO electronic L000286 - Manual (Page 43)

RESTRICTED USE ONLY Fargo Electronics, Inc.
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 6.1) 2-34
Printing the Test Print (after installing Ink and Card Cartridges)
Once the Ink and Card Cartridges are installed, a self-test should be performed to check for
proper operation of the Printer. (Note: The self-test function also requires that the Print
Driver is installed and the Printer's power and USB cables connected.)
Refer to the following to print a test print:
Step Procedure
1 Open the Printer Driver's Printer Properties Window.
2 Click on the Print Supplies tab. See Using the Print Supplies tab .
3 Click on the Test Printer button. See Selecting the Test Printer button .
4 From the Send Test window, click on the Send button to send a color test print
to the Printer. See
Selecting the Test Printer button . (Note: After a few seconds,
the following test image will begin printing.)