FARGO electronic L000286 - Manual (Page 49)

RESTRICTED USE ONLY Fargo Electronics, Inc.
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 6.1) 2-40
Technician Handbook for CardJet Card Printers (continued)
Topic Description
Card LED The Firmware correctly detects the card feed error condition and
indicates a fatal error condition (via the Card LED) and a PC on-screen
error message indicating a card feeding error (via the Driver Operator
interface).

The Printer has LED, Sensor and Error Message malfunction
indicators to inform the Operator that the equipment is
malfunctioning and to indicate which component is malfunctioning.

The Printer has LED indicators on the front that provide Error
reporting. In addition, Error reporting appears on the PC screens to
indicate error, status and corrective action.

The errors message that appear as a dialog to warn the Operator
are for Cards Out (includes LED flash).

The LED error light indicates an incorrect Card Cartridge
installation.
Card LED The Printer via the Card LED correctly detects and reports empty,
illegal or improperly load Card Cartridges.
Card LED (bad
Smart tag) Before running out of cards, the Printer correctly validates a
replacement Cartridge and reports that it has a bad Smart tag (via the
Card LED) and that printing will continue when the Card Cartridge is
replaced with a good Cartridge.
Card LED
(illegal Card
Cartridge) Before running out of cards, the Printer correctly validates a
replacement Cartridge and reports that it is illegal via the Card LED and
that printing will continue when the Card Cartridge is replaced with a
legal Cartridge.
Card Level
Monitoring (via
Card Cartridge) The Card Cartridge can be used to monitor card levels because it is
transparent and the Operator can see directly into the Cartridge.
Continued on the next page