FARGO electronic L000286 - Manual (Page 191)

RESTRICTED USE ONLY Fargo Electronics, Inc.
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 6.1) 5-18
Cleaning the Card Hopper Feed Roller
This procedure needs to be completed when the Card Feed Rollers become dirty, and the
Rollers can no longer properly grip the card.
Step Procedure
1 Unplug the Printer.
2 Remove the Card Cartridge.
3 Use the alcohol pad from the CardJet Maintenance Kit to gently wipe the Roller
clean, as shown below.
Continued on the next page