FARGO electronic L000286 - Manual (Page 149)

RESTRICTED USE ONLY Fargo Electronics, Inc.
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 6.1) 4-50
Using the Vertical and Horizontal Adjustment arrows
Step Procedure
2 As you can see:

The Vertical adjustment moves the image more toward the rear of the
Printer if a positive number is entered and more toward the front of the
Printer if a negative number is entered.

The Horizontal adjustment moves the image more toward the left-hand
side of the Printer if a positive number is entered and more toward the
right-hand side of the Printer if a negative number is entered.
The maximum value for the Vertical and Horizontal adjustments is
±
100 pixels
(10 pixels = about .03"/.8mm).
(Note: The direction the Vertical and Horizontal adjustment arrows point within
the Image Position window are representative of the direction the printed
image moves.)