FARGO electronic L000286 - Manual (Page 55)

RESTRICTED USE ONLY Fargo Electronics, Inc.
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 6.1) 2-46
Technician Handbook for CardJet Card Printers (continued)
Topic Description
Encoding Retry
option Encoding Retry option is provided the Operator via an on-screen
button that correctly initiates an attempt to re-encode the card when
selected.
Error Recovery
Printer Error
Reporting and
Recovery (both
410/C7 models)
Push on the Card button to clear a jam.
Push on the Cancel / Retry button after removing a misfed or stuck
card in the Card Path. (Note: The Cancel / Retry button activates
when a card is hung up in the Feed Station/Card Path or it is misfed.)
HiCo Magnetic
Encoding Card
Printing The Printer is correctly printing an image

when the Operator provides
Magnetic Encoding as part of the requested card image data via the
Driver software.
High-coercivity
Stripe Encoding The Printer supports optional high-coercivity magnetic stripe encoding.
It does not support low-coercivity and JIS II encoding.

Process: The Printer will not be capable of printing and encoding
sequentially.

Print > Encode > Feed: It will print, then encode and then feed in
the next card for printing.

Encoding Error: If there is an encoding error, the Printer must
pause operation and report an error so the improperly encoded card
does not end up in the stack of good cards.
Host Driver
Download
Software The host Driver download software automatically opens and prompts
the Operator through the Driver installation process when the Driver
CDROM is loaded into the PC.
HP Print Engine The stand-alone Core HP Print Driver supports all required functionality
of the HP Print Engine subsystem.
Windows recognizes three (3) USB devices: the Print Engine, the Fargo
Controller and an on-Board USB hub (needed to split USB upstream
into three USB downstream channels).
Continued on the next page