FARGO electronic L000286 - Manual (Page 14)

RESTRICTED USE ONLY Fargo Electronics, Inc.
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 6.1) 2-5
Technician Review of Printer Features
See the next page. Refer to the Technician Handbook for CardJet Card Printers in this
section.
Function Description
Top Cover Opens to allow access to the Ink Cartridges and Card Path. This cover must
be closed in order for the Printer to begin printing. See Opening the Top
Cover to the Card Printer . See CardJet Engineering Drawing R400019 in the
appendix.
Ink
Cartridge
Cradle Holds the Ink Cartridges and moves them back and forth across the card
during printing. (Note: Before Ink Cartridges can be loaded into the Printer,
the Printer Driver must be installed and the Printer's Power and USB cables
must be connected.)
Once this is done, the Printer's Ink Cartridge Cradle will move to the center
position whenever the Top Cover is open.
Card
Output
Hopper Catches printed cards as they eject from the Printer. This Hopper will hold a
maximum of 50 cards. The Card Output Hopper Door can be either opened
or closed while printing, but If you would like printed cards to stack neatly,
leave the door closed, as shown below. (Note: An external Card Output
Hopper is provided if the Printer model includes the Magnetic Stripe
Encoding Module.)