FARGO electronic L000286 - Manual (Page 18)

RESTRICTED USE ONLY Fargo Electronics, Inc.
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 6.1) 2-9
Technician Review of Printer Features (continued)
Function Description
Card
button and
LED Card Status button / LED:
The Card button is used to resume operation after an error condition is
cleared. In general, as the icon on this button indicates, errors are related to
card feeding and printing.

If an error occurs, the Card LED light will flash. Correct the error and
press the Card button to resume. (Note: The Card LED will also flash if
the Card Cartridge is not installed or if it has run out of cards.)

When lit, the amber LED above this symbol will flash to indicate you
need to check the status of the Card Cartridge and/or the card being
used for the current print job.
This LED will flash when:

The Card Cartridge is improperly installed or missing.

The Card Cartridge is out of cards.

A card is unable to feed from the Card Cartridge.

A card is jammed along the Card Path.

A non Fargo-certified Card Cartridge is installed.
Troubleshooting Instructions. See Section 2):
1. Correct the condition and press the Card button to continue printing.
(Note: If neither the Ink Cartridge nor the Card Cartridge are installed, only
the Card LED will flash at first. When the Card Cartridge is installed, the Ink
LED will then flash until the Ink Cartridge is installed. These two lights will not
flash simultaneously.)
See the Interpreting the LED Lights procedure.