FARGO electronic L000286 - Manual (Page 189)

RESTRICTED USE ONLY Fargo Electronics, Inc.
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 6.1) 5-16
Replacing the Felt Ink Well (continued)
Step Procedure
3 Use the Ink Felt removal tool to firmly grasp the left corner of the Ink Felt. Remove
it by pulling the Felt up and to the right, as shown below
Caution: The old Ink Felt contains wet ink and will stain anything it
contacts. It is recommended that the old Ink Felt be placed in a small plastic bag
and then discarded.
Continued on the next page